OBTAIN THE RIGHT SOLUTION FOR EVERY SMALL PROBLEM WITH ZAVENIR!

Corrosion of metal and removing paint sounds really tough but it is not that difficult after all. Both the problems can be solved with the right product. ZAVENIR has come up with the right and precise product or service for these problems.

We face various small problems in our day to day life and some of the can be as small as removing the paint or corrosion of metal. There are various methods through which this can be solved but only the right method will be helpful and last for a long time. Using the right product is the key factor to eliminate these problems.

Paint Remover Manufacturers come into the picture when you need a paint remover to remove paint off from the surface and other textures and also to cleanse the primary surface.The extra paint sprayed on the jigs, hooks, grills and things, and also the exclusion of defectively painted portions has been done usually by Paint Removers.

Therefore, this has to be done with the help of paint remover that is competent and effective for the work. Else the item might get damaged in the process and lose its charm! Therefore, choosing the right Paint Remover Manufacturers is essential.

ZAVENIR is one of the best Paint Remover Manufacturers who have come up with a product exactly for this purpose. They get the work done with ease as the technology used in production process makes it enhanced and competent. They do not break or cause any damage to the item; every bit of the unwanted paint is removed without creating any loss.

CORROSION OF METAL is another most common issue that is being faced. Corrosion usually occurs due to the oxidization of metals.It is the slow but sure obliteration of metals by chemical or electro-chemical reaction with their atmosphere. It is often possible to eliminate corrosion and this problem can be solved too, with the right type of product. Corrosion Inhibitors are one of the solutions to this problem. Corrosion Inhibitor is an element which can be added to the materials to slow down the pace of corrosion and therefore, the life of the metal in increased.

There are various disadvantages and inconvenience caused due to the corrosion of metal. And the foremost disadvantage is that the wholesomeness of the metal is lost. Other various disadvantages are as follows:

·         Cost of maintenance may increase.

·         There is a higher chance of collapsing, as the strength and structure is lost.

·         The life of the metal is reduced.

·         The interior grain structure of the metal tends to get affected.

·         The appearance of the item is also slipshod because of corrosion.

Therefore to avoid all these problems, ZAVENIR has come up with technology that can eliminate corrosion of metal and they have achieved this with the use of Corrosion Inhibitor. There are two products that can be used and both prevent the metal from getting damaged, they are available in liquid form and can be just applied on the metal. These products apart from corrosion proof have various other advantages too.

Zavenir- The Premium Rust Remover Manufacturer

Zavenir group is one of the premium rust remover manufacturer in India. Evapo-Rust is one of the unique technologies used by Zavenir as the unique chelating agent for removing of rust (iron oxide). Cleaning of rust from machinery has become an essential part of the industrial process for getting the optimum performance from the equipment.

Zavenir is trusted by many of the industries all over India as the best rust remover supplier as the technology used by Zavenir are more advanced and eco-friendly.

The Evapo-Rust technology works without causing any kind of environmental hazard and the active ingredients of Evapo-Rust bonds exclusively with the iron for the best result. It easily removes rust or iron oxide from the iron but it is not much efficient in removing iron oxide from steel as in steel the iron is held much strongly. Evapo-Rust performs at best level to ferrous metals only.

Features of Evapo-Rust: -

Being one of the top rust remover manufacturers in India, Zavenir has used advanced technologies to make the Evapo-Rust an unparallel rust removing agent. The basic features of Evapo-Rust are: -

·         Safe: - It is a super safe rust remover which causes no health and environmental hazards. It is one of the safest rust removers available in the market. It is completely safe on skin and doesn’t require and kind of protection to use. It is effective only to rust and is non-toxic, non-corrosive, creates no fumes or bad odour and is inflammable.

·      Reusable: - The Evapo-Rust solution can be used several times till it is spent. The Evapo-Rust solution will turn black one it is spent. One gallon of Evapo-Rust solution can be used to de-rust upto 300 pounds of metal.

·    Biodegradable: - The Evapo-Rust is water soluble and pH-neutral and it is non-toxic and environment-friendly.

·         Effective to Rust only: - The Evapo-Rust attacks only on rust only and it doesn’t harm any others. It de-rust without any kind of dismantling and will not harm other metals like copper, brass, aluminium, plastic, rubber, vinyl and others.

Evapo-Rust is the result of extensive research and years of hard work to get a most effective but eco-friendly rust removing agent. As a premium rust remover manufacturer Zavenir has bad sure to use the advanced technology manufacture high-quality rust remover which is effective on only rust. It will not leave any kind of effect on non-oxide coatings like paint or chrome.

Process of Using Evapo-Rust:-

Evapo-Rust is effective in removing all kind of rust from ferrous metal. It is suggested to pre-clean the item before the treatment and after proper rinsing, immerse the item completely in the solution.  The soaking time may vary depending on the level of rust as light rust can be removed in just 5 to 30 minutes and heavy rust may need time upto 15 hrs.

Zavenir group is one of the most trusted rust remover suppliers in India. Along with Evapo-Rust, there are many other cleaning agents supplied by Zavenir. Visit the official website www.zavenir.com for detailed information.

Zavenir Daubert the Premium VCI FILMS Manufacturer

Zavenir Daubert has the state of art infrastructure and technology with a number of chemical-based technologies providing the variety of high-quality lubrication. The continuous effort is to reduce the effect of high speeds and loads along with the issue of mist and evaporation control by replacing the traditional mineral base oils with superior refined base oils which have high saturated hydrocarbons and lower sulpher contents. Daubert VCI Films are one of the most popular products of Zavenir Dauber along with various others like: -

1. VCI Films

Zavenir Daubert is the unparalleled VCI FILMS Manufacturer and the Daubert VCI films are manufactured with the special multi-layer technology which has higher performance level in comparison to other available VCI films in the market.

The Daubert VCI films or Volatile Corrosion Inhibition technology provides a complete packaging system to ferrous and non-ferrous metals along with iron and steel.

Benefits of Daubert VCI films

·        
Protection: - The Daubert VCI films provide an ultimate protection against all kind of corrosion effects and moisture.

·       
Usage: - It can easily be customized as per need and very easy to use and apply.

·       
Other Features: - The Daubert VCI films come with a special multi-layer technology providing quality performance in compare to other available VCI films in the market.

•  It has lower moisture vapour transmission ration in compare to other products.
•  It comes with high dart impact strength.
•  It is the most effective volatile corrosion inhibitor.

2. Neat Cutting Oils

Hakuform neat cutting oil INDIA is another superior product of Zavenir Daubert which is manufactured with the hydrocracking and catalytic dewaxing processes. The process gives superior anti-oxidant properties to the base of the oil and resulting in more than 90 % saturation of all the hydrocarbon molecules.

Due to the highly saturated hydrocarbon content in the Hakuform neat cutting oil, the chances of evaporation and oil misting losses are reduced to a great extent.

Benefits of Hakuform Neat Cutting Oil INDIA

·        
Lower Losses: - The higher saturated hydrocarbon avoids loss due to evaporation and oil misting.

·       
Productivity: - The Hakuform neat cutting oil has higher productivity along with chlorine-free environment-friendly EP additives.

·         There is lower inventory cost and easy to transport.

3. Water soluble cutting oils

There is a high environmental risk and compromising on environmental norms with the traditional chlorinated water soluble cutting oils due to the higher percentage of chlorine concentration. The Hakuform water soluble cutting oils from Zavenir Daubert are made with Chlorine free extreme pressure additives formulation like esters.

KLUTHE Advanced Surfactant Technology and KLUTHE BIOLIT technology are used for the manufacturing of Hakuform water soluble cutting oils for a superior finished product.

Benefits of Hakuform Water Soluble Cutting Oils:

·         It provides a higher productivity along with the environment-friendly EP additives.

·     There is no chance of foaming with the Hakuform water soluble cutting oils providing a better fluid dynamics.

·           Due to the advanced formulation, there are very low carryover losses and consumption reduction.

·        No chance of any kind of health related hazards like skin irritations and there is no issues regarding smells also.